您好,欢迎来到山东本蓝环保设备科技有限公司![不锈钢净化塔] [PP净化塔]

全国服务热线: 0530-858655513105303235

  • 联 系 人:黄经理
  • 厂家电话:0530-8586555
  • 厂家传真:0530-8587555
  • 联系手机:131-0530-3235
  • 工厂地址:山东省巨野县中小企业孵化园

净化塔厂家的润滑方法有哪些呢?

更新时间:2019-12-16 16:25    浏览:
净化塔厂家的润滑方法有哪些呢?
What are the lubrication methods of purification tower manufacturers?
1、 净化塔厂家的主机传动设备、分析机油池、提升机涡轮箱及鼓风机均用油光滑。聚丙烯尾气吸收塔结构方式主要能够分为单塔体和双塔体,选用圆形塔体,用法兰分段联接而成。新机使用时机器的滚动部分及齿轮等跑合中,会有一定量的铁屑颗粒落下,为不使机器过快磨损,应在开机一星期后换油一次,以后即可按光滑表的期限换油。
1. The main engine transmission equipment, analysis oil pool, hoist turbine box and blower of purification tower manufacturer all use smooth oil. The structure of polypropylene tail gas absorption tower can be divided into single tower and double tower. The round tower is selected and connected by flange section. When the new machine is used, there will be a certain amount of iron particles falling in the rolling part of the machine and gear running in. In order not to make the machine wear too fast, the oil should be changed once a week after the machine is started, and then the oil can be changed according to the period of the smooth meter.
净化塔进程气体的正确挑选
Correct selection of process gas in purification tower
2、每次换油时,应将旧油放干之后应用火油或菜油清洗内部,洗净后把油放干,再注入新光滑油。同时,要注意(attention)聚丙烯吸收塔油位的凹凸,主机传动箱已油标的中线为油位,分析(Analyse)机油池,提升机涡轮箱的油为不要高于油标的一半,鼓风机(Blower)的油面应在油针的两刻线之间。油过少则机器光滑不足,过多则添加功率耗费,机器易过热,还可能漏油。
2. When changing oil every time, the old oil shall be drained and then the inside shall be cleaned with fire oil or vegetable oil. After cleaning, the oil shall be drained and then injected with new smooth oil. At the same time, pay attention to the unevenness of the oil level of the polypropylene absorption tower. The central line of the oil mark of the main engine transmission box is the oil level. The oil level of the oil pool of the analysis, the oil level of the hoist turbine box should not be higher than half of the oil mark. The oil level of the blower should be between the two engraved lines of the oil needle. If the oil is too little, the machine is not smooth enough. If the oil is too much, the power consumption will be added. The machine is easy to overheat and may leak oil.
净化塔
Purification tower
3、主机传动设备和分析机油(oil)池的上轴(Shaft)承(bearing)是靠装于其内部的螺旋油泵(Deep well pump)供油光滑的,它们的旋转方向不能搞错,转向反了油泵不起作用(role),轴承无油。聚丙烯尾气吸收塔吸收塔由贮液箱、塔体、进风口、喷淋层、填料层、旋流除雾层、出风锥帽、观检孔等组成。聚丙烯尾气吸收塔具有净化功率高、耐磨蚀性能***、重量轻、设备修理便利、比强度高、外观漂亮、占地面积小、尾气处理量***等长处。加注光滑油(Lubricating oil)前,应将油过滤,黄油(Butter)嘴要擦净,避免加油时泥沙带入。磨辊设备的工作条件***别恶劣,应保证其轴承光滑,并应定期清洗 填料净化塔。
3. The oil supply of the main engine transmission equipment and the upper bearing of the analysis oil pool is smooth by the deep well pump installed in it. Their rotation direction cannot be mistaken. The oil pump does not work if the steering is reversed, and the bearing is oil-free. The absorption tower of polypropylene tail gas absorption tower is composed of liquid storage tank, tower body, air inlet, spray layer, packing layer, swirl demisting layer, air outlet cone cap, inspection hole, etc. Polypropylene tail gas absorption tower has the advantages of high purification power, good abrasion resistance, light weight, convenient equipment repair, high specific strength, beautiful appearance, small floor area and large tail gas treatment capacity. Before adding lubricating oil, filter the oil and wipe the butter nozzle to avoid sediment during oil filling. The working conditions of the roller grinding equipment are very bad, the bearing shall be smooth, and the packing purification tower shall be cleaned regularly.
净化塔
Purification tower
对聚丙烯抛弃吸收塔定期光滑,能够减少设备(shèbèi)以及内部部件的磨损(零部件失效的一种基本类型),提高功率(efficiency),添加光滑度,要使用***的光滑油,减少因油品的原因形成的设备损。
It can reduce the wear of equipment (SH è B è I) and internal components (a basic type of component failure), improve the power, add smoothness, use good smooth oil, and reduce the equipment damage caused by oil products.
返回:常见问题

产品快速导航

MORE+


工厂地址:山东省巨野县中小企业孵化园

电话:0530-8586555 手机:131-0530-3235

传真:0530-8587555

扫一扫

山东本蓝环保设备科技有限公司 主要生产:不锈钢净化塔PP净化塔